Leica-geosystems Leica GeoAce User Manual

GeoAce RTK Base StationUser ManualVersion 1.0English

10GeoAce, Unpacking the Instrumenta) User Manual (printed), Multilingual auxiliary Safety Guideb) GEV71, 12V Car Battery adapterc) GEV219, 1.8m Power

100GeoAce, Technical DataInternal batteryBattery externalOperating times The given operating times are valid for• GeoAce: fully charged GEB222 battery

GeoAce, Technical Data 101Electrical dataGeoAce, static - built-in HSPA Modem5.5 h continuouslyEquipment Operating timeType Radio Digital cellular pho

102GeoAce, Technical DataGalileo Alt-BOC covers bandwidth of Galileo E5a and E5b.Environmental SpecificationsTemperatureGalileo Alt-BOC 1191.795 MHzG

GeoAce, Technical Data 103Protection against water, dust and sandHumidityType ProtectionInstrument IP67 (IEC 60529)Dust tightWaterproof to 1 m tempora

104GeoAce, Technical Data7.1.1 Tracking CharacteristicsSatellite reception Triple frequencyInstrument chan-nels and satellite trackingDepending on th

GeoAce, Technical Data 105GLONASSGalileoCarrier phase and code measurements on L1, L2 and L5 (GPS) are fully independent with AS on or off.Satellites

106GeoAce, Technical Data7.2 Conformity DeclarationsConformity to national regulationsFor products which do not fall under R&TTE directive:Conform

GeoAce, Technical Data 107Conformity to national regulations• FCC Part 15, 22 and 24 (applicable in US)• Hereby, Leica Geosystems AG, declares that th

108GeoAce, Software Licence Agreement8 Software Licence AgreementInternational Limited WarrantyThis product is subject to the terms and conditions set

GeoAce, Software Licence Agreement 109Such agreement is provided together with all products and can also be referred to and downloaded at the Leica Ge

GeoAce, Unpacking the Instrument 111.2 Additional Packaging ContentAdditional PackagingItems in additional packaging:a) Light Duty Tripotb) GKL211,Bat

110GeoAce, IndexIndexAAdditional Packaging Content ... 11BBatteriesCharging, first-time use ...

GeoAce, Index 111LLabellingGEB221 ... 98GEB222 ...

112GeoAce, IndexPosition Mode ... 26Region ... 37

GeoAce, Index 113

Total Quality Management: Our commitment to total customer satisfaction.Leica Geosystems AG, Heerbrugg, Switzerland, has been certified as being equip

12GeoAce, Leica GeoAce RTK Base Station User Interface2 Leica GeoAce RTK Base Station User InterfacePorts and connectionsa) Battery coverb) Internal c

GeoAce, Leica GeoAce RTK Base Station User Interface 13User Interface overviewa) Displayb) Navigation keysc) ENTER keyd) ESC keye) Ambient light senso

14GeoAce, Leica GeoAce RTK Base Station User InterfaceUser Interface elementsThe instrument is used as a stand-alone or network RTK Base Station. It i

GeoAce, Leica GeoAce RTK Base Station User Interface 15Use the navigation keys to select a program icon and to navigate within submenus.Use the ke

16GeoAce, Leica GeoAce RTK Base Station User InterfaceFirst time use / Reset DefaultsWhen the Base Station is turned on for the very first time or aft

GeoAce, Leica GeoAce RTK Base Station User Interface 172.1 Main ScreenAbout the Main ScreenThe Main Screen is the first screen that is displayed after

18GeoAce, Leica GeoAce RTK Base Station User InterfaceThe internal battery does not get charged when external power is being used. The battery can on

GeoAce, Leica GeoAce RTK Base Station User Interface 19Tracking Status The display content varies according to the system status:• GPS - The number of

2GeoAce, IntroductionIntroductionPurchase Congratulations on the purchase of a Leica GeoAce RTK Base Station.This manual contains important safety dir

20GeoAce, Leica GeoAce RTK Base Station User InterfaceVirtual Wrench StatusThe display content varies according to the system status:• Not Connected -

GeoAce, Leica GeoAce RTK Base Station User Interface 212.2 Main MenuAbout the Main MenuThe Main Menu is used to setup the instrument.Main Menu Content

22GeoAce, Leica GeoAce RTK Base Station User Interface2.3 ChannelAbout the Channel MenuThe Channel Menu is used to change the channel of the internal

GeoAce, Leica GeoAce RTK Base Station User Interface 23How to Select a Radio ChannelUse the up/down keys to select a Channel. Press the button to

24GeoAce, Leica GeoAce RTK Base Station User Interface2.4 SettingsAbout the Settings Menu ScreenThe Settings menu is used to change how the instrument

GeoAce, Leica GeoAce RTK Base Station User Interface 25To select any of these options, use the up/down keys to scroll to the required menu option a

26GeoAce, Leica GeoAce RTK Base Station User Interface2.4.1 Position ModeAbout the Position ModeThe Position Mode menu is used to change the type of P

GeoAce, Leica GeoAce RTK Base Station User Interface 27Snap Previous Snaps a previously used position and reports it again. This is done for in-field

28GeoAce, Leica GeoAce RTK Base Station User InterfaceInfluence of Average Time SettingsChanging the Averaged time settings has influence on the accur

GeoAce, Leica GeoAce RTK Base Station User Interface 29Fixed Position Manually set the instrument to report a fixed position or automatically take ove

GeoAce, Introduction 3Symbols The symbols used in this manual have the following meanings:Validity of this manualThis manual applies to the GeoAce RTK

30GeoAce, Leica GeoAce RTK Base Station User Interface2) Use the navigation keys to move the cursor and to change the settings to the required value.

GeoAce, Leica GeoAce RTK Base Station User Interface 312.4.2 Data FormatAbout the Data FormatThe Data Format option is used to change the output forma

32GeoAce, Leica GeoAce RTK Base Station User Interface2.4.3 Internal RadioAbout Internal RadioThe Internal Radio option is used to change settings rel

GeoAce, Leica GeoAce RTK Base Station User Interface 33Power Level - Submenu ContentThe output Power Level of the internal radio can be reduced in sit

34GeoAce, Leica GeoAce RTK Base Station User InterfaceTDMA Mode - Submenu ContentThe TDMA Mode can reduce the effects of interference signals of nearb

GeoAce, Leica GeoAce RTK Base Station User Interface 35Multi-transmit - Submenu ContentIn Multi-transmit mode data will be retransmitted a number of t

36GeoAce, Leica GeoAce RTK Base Station User Interface2.4.4 GLONASSGLONASS - Menu ContentThe GLONASS option is used to enable or disable the use of GL

GeoAce, Leica GeoAce RTK Base Station User Interface 372.4.5 RegionRegion - Menu ContentThe Region option is used to set the region where the instrume

38GeoAce, Leica GeoAce RTK Base Station User Interface2.4.6 LanguageLanguage - Menu ContentThe user interface language is set with the Language option

GeoAce, Leica GeoAce RTK Base Station User Interface 392.4.7 NetworkNetwork - Menu ContentWith the Network option enabled, the instrument can be used

4GeoAce, IntroductionAvailable docu-mentationRefer to the following resources for all Leica GeoAce RTK Base Station docu-mentation/software:• www.aggu

40GeoAce, Leica GeoAce RTK Base Station User InterfaceSelect Spider Status for helpful information in case of connecting issues. This status view can

GeoAce, Leica GeoAce RTK Base Station User Interface 412.4.8 Saved PositionsSaved Positions - Menu ContentThe Saved Positions option is used to manage

42GeoAce, Leica GeoAce RTK Base Station User Interface2.4.9 Serial PortSerial Port - Menu ContentThe Serial Port option is used to setup the external

GeoAce, Leica GeoAce RTK Base Station User Interface 43• External Power - Disabled or Enabled (to power an external radio via the serial port, a speci

44GeoAce, Leica GeoAce RTK Base Station User Interface2.4.10 Cell Modem SettingsCell Modem Settings - Menu ContentThe Cell Modem Settings option is us

GeoAce, Leica GeoAce RTK Base Station User Interface 452.4.11 Backup ConfigurationBackup Configura-tion - Menu ContentThe Backup Configuration option

46GeoAce, Leica GeoAce RTK Base Station User InterfaceDuring the backup all instrument settings will be saved except for the cell modem PIN. The confi

GeoAce, Leica GeoAce RTK Base Station User Interface 472.4.12 Load Config from USBLoad Config from USB - Menu ContentIt is possible to create custom c

48GeoAce, Leica GeoAce RTK Base Station User InterfaceHow to load a config file into the instrument:1) Insert a USB flash drive into the instrument. 2

GeoAce, Leica GeoAce RTK Base Station User Interface 492.5 ServiceAbout the Service Menu ScreenThe Service Menu is used to perform service type functi

GeoAce, Table of Contents 5Table of ContentsIn this manual Chapter Page1 Unpacking the Instrument81.1 Leica GeoAce RTK Base Station Container Contents

50GeoAce, Leica GeoAce RTK Base Station User Interface2.5.1 StatusAbout the Status MenuThe Status Menu is used to display the status of position, batt

GeoAce, Leica GeoAce RTK Base Station User Interface 51Press the key at the Spider Status option for further information regarding the current Spid

52GeoAce, Leica GeoAce RTK Base Station User Interface2.5.2 System InfoAbout the System Info ScreenThe System Info menu is used to display the system

GeoAce, Leica GeoAce RTK Base Station User Interface 53• Radio Type• Radio Serial Number• Radio FW version

54GeoAce, Leica GeoAce RTK Base Station User Interface2.5.3 Software UpdateAbout the Soft-ware Update MenuThe Software Update menu is used to update t

GeoAce, Leica GeoAce RTK Base Station User Interface 55Make sure the internal battery has been fully charged before perfoming a Software Update!Do n

56GeoAce, Leica GeoAce RTK Base Station User InterfaceThe instrument will install the latest software version that is available via Virtual Wrench.T

GeoAce, Leica GeoAce RTK Base Station User Interface 572.5.4 LoggingLogging - Menu ContentThe Logging menu is used to enable or disable logging of ins

58GeoAce, Leica GeoAce RTK Base Station User Interface2.5.5 Rollback SoftwareRollback Software - Menu ContentThe Rollback Software option is used to r

GeoAce, Leica GeoAce RTK Base Station User Interface 592.5.6 Reset DefaultsReset Defaults - Menu ContentThe Reset Defaults option is used to reset the

6GeoAce, Table of Contents2.4.10 Cell Modem Settings 442.4.11 Backup Configuration 452.4.12 Load Config from USB 472.5 Service 492.5.1 Status 502.5.2

60GeoAce, Leica GeoAce RTK Base Station User Interface3) The security query Reset? appears.– Select No and press to interrupt the reset procedure.–

GeoAce, Leica GeoAce RTK Base Station User Interface 612.5.7 Reset GPSReset GPS - Menu ContentThe Reset GPS option is used to perform a factory reset

62GeoAce, Leica GeoAce RTK Base Station User Interface2.5.8 Virtual WrenchVirtual Wrench - Menu ContentThe Virtual Wrench option is used to connect th

GeoAce, Leica GeoAce RTK Base Station User Interface 63• Auto Connect - if enabled, the instrument will automatically connect to Virtual Wrench.• Requ

64GeoAce, Leica GeoAce RTK Base Station User Interface2.5.9 Extended FeaturesExtended Features - Menu ContentThe Extended Features option is used to u

GeoAce, Leica GeoAce RTK Base Station User Interface 65A message will show if the entered code was valid or invalid.How to add Extended Features via

66GeoAce, Using the Leica GeoAce RTK Base Station3 Using the Leica GeoAce RTK Base Station3.1 Mounting on TripodMounting on Tripod step-by-stepFollow

GeoAce, Using the Leica GeoAce RTK Base Station 67Step Description1. Plug the antenna bracket onto the tripod centre screw.The antenna must face upwa

68GeoAce, Using the Leica GeoAce RTK Base Station3.2 Installing the Internal BatteryInsert and remove the battery step-by-stepFollow the step-by-step

GeoAce, Using the Leica GeoAce RTK Base Station 69Place the instrument onto a stable surface. (Not illustrated)Step Description1. Push the slide fast

GeoAce, Table of Contents 75 Care and Transport755.1 Transport 755.2 Storage 765.3 Cleaning and Drying 776 Safety Directions786.1 General Introduction

70GeoAce, Using the Leica GeoAce RTK Base Station3.2.1 General Battery HandlingCharging / first-time use• The battery must be charged prior to using i

GeoAce, Using the Leica GeoAce RTK Base Station 713.3 Installing a SIM CardInsert and remove the SIM card step-by-stepFollow the step-by-step instruct

72GeoAce, Using the Leica GeoAce RTK Base StationPlace the instrument onto a stable surface. (Not illustrated)Step Description1. Push the slide faste

GeoAce, Setup 734Setup4.1 Real-Time Base SetupReal-time refer-ence setup with internal modem004225_001abcdefgh

74GeoAce, SetupReal-time refer-ence setup step-by-stepThis list references to "Real-time reference setup with internal modem".a) Whip antenn

GeoAce, Care and Transport 755 Care and Transport5.1 TransportTransport in the fieldWhen transporting the equipment in the field, always make sure tha

76GeoAce, Care and Transport5.2 StorageProduct Respect the temperature limits when storing the equipment, particularly in summer if the equipment is i

GeoAce, Care and Transport 775.3 Cleaning and DryingProduct and accessories• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moist

78GeoAce, Safety Directions6 Safety Directions6.1 General IntroductionDescription The following directions enable the person responsible for the produ

GeoAce, Safety Directions 796.2 Definition of UseIntended use • Computing with software.• Carrying out measurement tasks using various GNSS measuring

8GeoAce, Unpacking the Instrument1 Unpacking the Instrument1.1 Leica GeoAce RTK Base Station Container ContentsDescription The container configuration

80GeoAce, Safety DirectionsReasonably foreseeable misuse• Use of the product without instruction.• Use outside of the intended use and limits.• Disabl

GeoAce, Safety Directions 816.3 Limits of UseEnvironment Suitable for use in an atmosphere appropriate for permanent human habitation: not suitable fo

82GeoAce, Safety Directions6.4 ResponsibilitiesManufacturer of the productLeica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geo

GeoAce, Safety Directions 83WARNING The person responsible for the product must ensure that it is used in accordance with the instructions. This pers

84GeoAce, Safety Directions6.5 Hazards of UseWARNING The absence of instruction, or the inadequate imparting of instruction, can lead to incorrect or

GeoAce, Safety Directions 85DANGER Because of the risk of electrocution, it is dangerous to use poles and extensions in the vicinity of electrical in

86GeoAce, Safety DirectionsWARNING Inadequate securing of the working site can lead to dangerous situations, for example in traffic, on building site

GeoAce, Safety Directions 87WARNING If the product is used with accessories, for example masts, staffs, poles, you may increase the risk of being str

88GeoAce, Safety Directionspriate protection elements, like a lightning arrester. These installations must be carried out by an authorised specialist.

GeoAce, Safety Directions 89Air terminal arrangement, plan viewGrounding the instru-ment/antennaa) Antennab) Support structurec) Air terminalGS_039abc

GeoAce, Unpacking the Instrument 9Container Leica GeoAceContainer configuration for Leica GeoAce RTK Base Station.004176_001abcdefgh

90GeoAce, Safety DirectionsWARNING Using a battery charger not recommended by Leica Geosystems can destroy the batteries. This can cause fire or expl

GeoAce, Safety Directions 91WARNING If battery terminals are short circuited e.g. by coming in contact with jewellery, keys, metalized paper or other

92GeoAce, Safety DirectionsPrecautions:Product-specific treatment and waste management information can be downloaded from the Leica Geosystems home pa

GeoAce, Safety Directions 936.6 Electromagnetic Compatibility EMCDescription The term Electromagnetic Compatibility is taken to mean the capability of

94GeoAce, Safety DirectionsCAUTION Disturbances caused by electromagnetic radiation can result in erroneous measure-ments.Although the product meets

GeoAce, Safety Directions 95Radios or digital cellular phonesUse of product with radio or digital cellular phone devices:WARNING Electromagnetic fiel

96GeoAce, Safety Directions6.7 FCC Statement, Applicable in U.S.The greyed paragraph below is only applicable for products without radio.WARNINGThis

GeoAce, Safety Directions 97WARNING Changes or modifications not expressly approved by Leica Geosystems for compli-ance could void the user's au

98GeoAce, Safety DirectionsLabelling internal battery GEB221, GEB222This device complies with part 15 of the FCC Rules. Operation is subject to the fo

GeoAce, Technical Data 997 Technical Data7.1 Technical DataDimensions The overall dimensions are given for the housing including the sockets.Weight In